MARKET SEGMENTS
Raw Material Processing
Kluberplex AG 11-462
Application: Turn Rolling Bearing & Turning Gear Drive.
Kluberlub BE 71-501
Application: Drive / return cylinder rolling bearings.
Kluberlub BVH 71-461
Application: Eccentric shaft rolling bearings.
Kluberlub BE 41-1501
Application: Rolling Bearing.
Kluberfluid / Grafloscon Series
Application: Open Gear Drive.
Lime Plant
Kluberfluid / Grafloscon Series
Application: Open Gear Drive.
Wolfracoat C Fluid
Application: Internal Riding Ring.
Klubersynth GEM 4 N Series
Klubersynth GH 6 Series
Kluberlub BE 41-1501
Application: Support Rolling Bearing & Thrust Roller.
Steel Mill
Wolfrakote Top Paste
Application: Plain Bearings & Other Surfaces.
Kluberlub BE 41-1501
Application: Roller Bearings.
Grafloscon CA Ultra Spray
Kluberfluid C-F 3 Ultra
Application: Open Gear Drives.
Stabutherm GH 461/462
Application: Centralised System Lubrication.
Barrierta L55/2
Application: Hinges of Cover Cooling System.
Kluberalfa YV 93-302
Application: Valves & Rotary Connections.
Continuos Casting
Wolfrakote Top Paste / Fluid
Application: Sliding Surface & Thread, Oscillating Mechanism.
Stabutherm GH 461/462
Klubersynth HB 74-401
Application: Oscillating Mechanism, Rolling Bearings, Wet Segment Rolling Bearings, Extractor Rolling Bearings, Bearings & Rollers Moving Beam Bearings.
Kluberalfa YV 93-302
Application: Oxygen Valves & Connections.
Coke Plant
Kluberlub BVH 71-461
Application: Gas Cocks.
Wolfracoat C Fluid
Application: Door Lifting Chains.
Costrac AK 0
Application: Precipitator Bearings.
Kluberplex AG 11-462
Application: Pusher Arm.
Strabutherm GH 461
Application: Tap Cocks & Special Rolling Bearings.
Kluberlub BE 41-1501
Application: Bearings.
Klubersynth BEM 44-4600
Application: Wire Recliner Gearbox.
Background: Lithium/mineral oil fluid grease with based oil viscosity 330 cSt is required.
Uniqueness: Thixotropic behaviour, Non-DG Goods, Wide operation temperature (-50 C to 140 C).
Klubermatic STAR
Application: Take Up Pulley Plumber Block Bearings.
Background: Previous spring-type auto-lubricator not working well/damaged caused base oil separated and the grease hardened in the cartridge.
Uniqueness: Smooth grease dispensing via electronic, controlled dispenser without failure, IP-65, overload pressure detector.
Barrierta L55/2
Application: Dampener bearing on a steam turbine and high-temperature bearing.
Background: Grease of other brand hardened and carbonized in the bearing and greasing tube. Operating temperature approximately at 220-250C.
Uniqueness: No more hardened and carbonized grease residues in the bearings and greasing tube.
Polyhub HVT 50A Spray
Application: Soot Blower rack and chain drive.
Background: Recommendation by OEM, Clyde Bergemann GmbH specifically mentioned for chain drive.
Uniqueness: High viscous and versatile adhesive lubricant.
Kluberlub BE 41-1501
Application: Conveyor Roller Bearing.
Background: Bearing jammed due to exposure to high load conditions and hammering effects.
Uniqueness: Heavy-duty grease, high base oil viscosity (ISO VG 1500) for excellent wear protection, where the thick oil film will protect the bearing from the loading and hammering effect, contains solid lubricant for an emergency operation.
Klubersynth GH 6 320
Application: Pulveriser gearbox.
Background: –
Uniqueness: Long service time and can last for higher temp up to 70Degc.
Gas Compressor
Application:
- Screw-type & Reciprocating compressors.
- OEMs – Howden, Mycom, Nuovo Pignone, Aerzen, etc.
- Hydrocarbon gases, ammonia refrigerant.
Benefits: Higher reliability and safe operations,
- Resistance to dilution.
- Reduced oil consumption.
- Extension life of piston rings, packings & valves.
Solutions: Klüber‘s Gas Compressor Simulator uses a compressor‘s discharge temp. and pressure to determine the dilution potential of the gas in the lubricant.
Air Compressor
Application:
- Centrifugal & screw type air compressors.
- Residue formation impacting efficiency.
- High evaporation rates of mineral oils.
Benefits:
- More efficient operation and reduced energy consumption.
- Extended oil change intervals.
- Minimal residue formation.
Solutions: Kluber Summit SH 46 (8.000 operating hours) & Kluber Summit Supra 32 (8.000 operating hours).
Rolling Bearings
Application:
- Service temp. up to 300ºC.
- Exposure to chemical and gases.
Benefits:
- Excellent high temp. resistance.
- Long service intervals due to excellent resistance against agressive environment.
Solutions: BARRIERTA L 55/2 & Kluberalfa HPX 93-1202 (> to 2600C)
Barrier Fluids
Application:
- Hydrocarbon pumps with dual tandem face-to-face mechanical seals.
- Cooling and/or lubricating of seals to prevent dry running.
- Prevention of seal face destruction.
Benefits:
- Excellent high temp. resistance tested on high temp. test rigs.
Solutions: PARALIQ P 12 (White Oil), Kluberfluid NH1 4-005 (PAO), Kluberoil 4 UH1-15 AF (PAO), Kluber Summit DSL 32 (Ester) & Kluber Summit PGS 10 A (Polyglycol).
Anti Seize
Application:
- Assembly of screw & bolts.
- Corrosion, fretting and blocking of fasteners.
- Exposure of high temp. & aggressive media.
Benefits:
- High degree of purity for minimum impact on screws as paste is virtually free of chlorine, fluorine and sulphur.
- Fasteners easy to undo due to low release torque.
- Efficient assembly of varying dimensions and materials.
Solutions: Kluberpaste HS 91-21.
Kluberplex AG 11-462
- Klueberplex AG 11-462 is Klueber grease dedicated for open gear drives, and wire- ropes protection.
- Based on mineral oil and an aluminium complex soap thickener à very good adhesion even at low or high temperature.
- With ISO viscosity 460 mm2/s, and contain white solid lubricant à Klueberplex AG 11- 461/2 can sustain higher loads.
- Low risk of contamination of machine environment due to the use of white solid lubricants and low lubricant consumption.
- Very good corrosion protection also when exposed to saltwater.
Before
After
Before
After
FEEL FREE TO TALK TO US
Can’t find the product that you are looking for? Email or call us and tell us what you are looking for.